Skip to Content

DIY Odor Remover To Spread Beautiful Aroma Around

Making your own DIY odor remover at home is a straightforward task that can be done with just a few basic items. This DIY project is cost-effective and uses natural components, providing a safer alternative to commercial odor-removing products. Our Homemade DIY Odor Remover incorporates the power of baking soda to neutralize unwanted smells and essential oils to leave a refreshing scent in your spaces. You can use this in different areas of your home, such as the kitchen, bathroom, or closet. Best of all, the process is simple, and the ingredients are readily available.

Homemade Odor Remover

DIY odor remover

The following process will show you how to create a DIY Odor Remover. The main ingredient in this recipe is baking soda, which is known for its powerful odor-absorbing properties. Here's a simple process to follow:


  • Baking Soda
  • Essential Oil
  • Airtight Jar
  • A piece of cloth or paper towel
  • Rubber Band


  1. Fill your airtight jar about halfway to two-thirds full with baking soda.
  2. Add approximately 15-20 drops of your preferred essential oil to the baking soda in the jar. You may want to use more or less, depending on your preference.
  3. Stir baking soda and essential oil until the oil and baking soda are thoroughly mixed.
  4. Instead of the jar's original lid, secure a piece of cloth or a paper towel with a rubber band. This will allow the scent to permeate the air while absorbing unwanted odors.
  5. Place the jar in an area where you'd like to neutralize odors. You can use it in your refrigerator, bathroom, closet, car, or other small, confined space.

Note: Every two weeks or so, give the mixture a stir to activate the odor-absorbing properties again. When the mixture seems "used up," repeat the process to create a new batch. If you wish to use the odor remover solely in your refrigerator, you may not need to add any essential oils.

Always remember that essential oils are potent and can be harmful if misused. Keep this DIY odor remover out of reach of children and pets to avoid ingestion or contact with eyes.

DIY Odor Remover For Clothes

To create odor remover for your clothes, you'll need these supplies:

  • 1 cup of distilled white vinegar or apple cider vinegar
  • 2 cups of distilled water
  • 10-20 drops of essential oil (like lavender, lemon, or tea tree)
  • An empty spray bottle

Follow these steps:

  1. Gather Your Ingredients and Supplies: This solution requires a one-to-two ratio of vinegar to distilled water and your choice of essential oil for fragrance.
  2. Mix Your Solution: To create the mixture, pour 1 cup of distilled white vinegar or apple cider vinegar and 2 cups of distilled water into an empty spray bottle. The vinegar helps neutralize odors while water dilutes it to prevent possible discoloration of clothes.
  3. Add Essential oils: Add 10-20 drops of your favorite essential oil. Essential oils not only give a pleasant smell to your solution, but some, like tea tree oil, also have antibacterial properties.
  4. Shake Well: After adding the ingredients, secure the spray bottle lid and shake well to mix everything together.
  5. Use: To use, lightly mist the offending garment with your homemade spray, then allow it to air dry. The vinegar smell will dissipate as it dries, leaving only the scent of essential oil behind.

Always remember to do a patch test before spraying on visible parts of the cloth to ensure the spray doesn't cause discoloration. You can refill and use this DIY odor remover for your future needs. It is cost-effective and less harsh than many commercial odor removers.

Note: Some fabrics may retain the smell of vinegar until they're completely dry, and also, not every type of odor will be removed with this treatment. If the smell persists after the clothes have dried, you might need to seek professional dry cleaning or other natural removal methods.

Sharing is caring!